Last update

Designed for fast, safe and effective removal of single-use trawlers and/or urinals at the place of use.

Suitable for bathrooms in private rooms and isolation rooms, without leaving out areas of treatment and diagnosis such as Imaging, Day Hospitals, Dialysis and Urgent Services.

See more information in our catalog.

Contact us!

Certificação Acreditada
Operation Room
O.R. Aspiration >> Op-Flex Aspiration System


  • Yankauer type Probe/Cannula with small side orifices which reduce vacuum whenever there is adhesion of tissues to the distal orifice, preventing traumatic lesions caused by aspiration. It is endowed with an ergonomic design which allows the surgeon a safe and less tiresome use in any position.
  • Longitudinal vacuum control, allowing to regulate the aspiration pressure with a finger, bypassing the need to fall back on the aspiration system’s control unit.
  • Cannula connection tube (210 cm), through a recoil system which prevents the risk of any accidental disconnection, allowing for a safe link to any other cannula of the OP-Flex program during surgery. Universal connection to the aspiration system.
  • Tube anti-crease system (at both ends), preventing, at tight angles, any restrictions, flow interruptions or increase in noise, typical of traditional systems.
Drainage >> Unomedical Unovac

Low vacuum and constant aspiration closed system, for active drainage of post-op wounds.

Thoracic Drainage >> Microtek

MictotekThoracic drainage consists of the controlled removal of air and/or secretions from the thorax in order to reestablish pulmonary function, after cardiac surgery, for instance. The drainage is carried out with a low vacuum control system produced by Microtek.

The simplicity of the flask system makes it much easier to connect, handle and control. The readings are very accurate, as the flasks are transparent and the calibration is clear. The drainage vacuum is also controlled with elevated precision. The modular design allows for a connection to a series of other systems in order to meet the required demands. From an economical point of view, the use of the single use flask is beneficial, as it can be easily replaced without requiring complete replacement of the system.

Please contact us for more information.

System for Measuring Hourly Diuresis >> Unometer Safeti Plus ™


  • Anti-reflux valve at the connector to the catheter. Connection tube to the measuring chamber double lumen, in order to avoid the accumulation of residual urine in the tube.
  • Urine sampling bag, with a discharge system and an anti-reflux valve, previously connected to the measuring chamber, with 2000ml capacity. 30 µm hydrophobic anti-bacterial filter. Allows for lateral placement of discharge valve.
  • These features allow for the horizontal placement of the Unometer (with posterior section facing upwards) without risking retrograde contamination, without interrupting bladder drainage and without deficiencies in the readings after returning it to its vertical position. Occasional urine losses to the patient’s bed are eliminated.
  • The hygienic opening at the top can be performed with a single hand.
  • The discharge to the urine sampling bag is vertical, performing an hourly chamber cleaning flush and preventing the ascending progression of bacteriuria.